![]() |
|
|
| Promoting Responsible Breeders and Responsible Dog Ownership |
|
Home | Breeds
| Kennels | Form | Logo |
Contact |
| *B R I A R D - STANDARD | ||||
Get our Logo here Your own website The Breeders Breed History Breed Standard Breed Information. |
(Canadian Kennel Club)
Size:
61 cm to 68.5 cm for males. 56 cm to 65 cm for females. The length of
the body should be slightly greater (3-5 cm) than the height at the
withers. The length of the Briard is measured from the point of the
shoulder to the point of the buttocks. The Briard should not be cobby,
nor square. Puppies under the age of one (1) year may be below the
minimum. Disqualification for adult males under 61cm or over 68.5cm
and for adult bitches under 56cm and over 65cm-measurements taken at
the withers. Coat & Colour: Coat: Texture: Coarse, long and dry; slightly wavy, with a light undercoat. The coat texture is likened to that of a coarse-haired goat’s coat. In the adult Briard the coat should be at least 7 cm in length at the shoulder. Colour: Permissible colours: Black, tawny, charbonné and grey. Uniformity is preferred in all permissible colours. Where there are two or more colours, they must blend so as not to form a demarcation line. In the tawny colours, the colour must be rich, neither pale nor washed out. A black mask may or may not be present. In Charbonné, (a tawny dog with light charcoaling on shoulders, neck and/or back), the charcoaling overlay should not form a heavy mantle of black over tawny and the charcoaling should appear to mix in with the tawny shades. In Greys, the colour may appear as uniform slate grey with black points at the ears, muzzle and tail, or as grey blending through the black coat. A bi-colour (or black and tan pattern), a coat where there is a clear demarcation of a heavy black or grey overlaying tawny, is not acceptable. It is permissible to have a white spot 2.5 cm or less on the forechest. In blacks there may be scattered white “guard” hairs scattered throughout the coat. Too many glints of reddish coat in a black must be faulted. Coats that are extremely washed out as to appear nearly white are disqualified, as are bi-colours. Head: The head is comprised of two rectangles, one larger (skull) than the other (muzzle). The two rectangles meet in a well defined stop midway between the occiput and the tip of the nose. The head is furnished with hair forming a beard, moustache and eyebrows lightly veiling the eyes. The planes of the skull and muzzle must be parallel. The length of the skull and muzzle are approximately the same, so that viewing the head from the side, it appears as two equal length rectangles with one, the muzzle being slightly lower than the rectangle of the skull. The overall length of the head, measured from the occiput to the tip of the nose is approximately 40% of the dog’s height at the withers. Forehead: Flat, slightly rounded at the edges and broad. Muzzle: Nasal bridges straight and flat. There should be no pendulous flews, nor should the muzzle appear snipey or narrow. Teeth: Teeth strong, white. Scissors bite preferred. Nose: Always square and black; nostrils strong and open. The nose should be large. Eyes: Horizontal, well open, quite large, not
slanting, of dark color, with an intelligent and calm expression. The rims
of the eyelids, regardless of the colour of the coat should have very black
pigmentation. Eyes of any colour other than black or brown are
disqualified. Ears: Set high. Must be carried erect, if cropped. If
uncropped, rather short and not positioned flat against the head. There
is no preference towards cropped or uncropped ears. The length of the
uncropped ear must be equal to or slightly less than one half the length
of the head, smooth and covered with long hair. When alert the
uncropped ears should lift slightly giving a square look to the skull. The
cropped ears when alert, tend to move toward each other over the head,
with the opening facing forward. Ears should be set on the skull above
the eyeline.
Neck:
Muscular and well clearing the shoulders. Forequarters:
Shoulders are well muscled, legs have strong bone and are vertical.
Pasterns are slightly inclined. The shoulder should have a good layback.
The ideal is 45 degrees of angulation. Forequarter faults are: legs not
vertical, loose shoulders, weakness in pasterns, or straight shoulders. Body:
chest Wide (the width of the hand between the two elbows), deep and
well let down to the elbows. The chest is ovate in shape. There should be
a forechest present. Dogs with too narrow a chest, lacking depth, lacking
a forechest, with ribs too flat or barrel-chested, should be faulted. Back:
Straight and level. The topline should show no sign of dips nor roaching.
Croup: Very slightly rounded and inclined approximately 30 degrees.
Croups which are too steep or too straight or those which are definitely
higher than the withers must be faulted. Hindquarters:
Hindquarters: The rear thighs should be well muscled, the leg bones
strong and parallel. The stifle should be well angulated. The pasterns
should be slightly inclined. Hindquarter faults are: lack of stifle
angulation, weakness in rear pasterns. Hocks: Well-angled with the leg
nearing the vertical below the hock joint. The hock is moderately let
down with the upper bone joining the lower in a 135 degree angle. Cowhocks
and hocks that turn outward should be faulted. When moving the
hock should flex open allowing the toes to point to the rear. Sickle hocks
are a severe fault that contributes to an inelegant gait. Feet:
Strong,round in shape. The pads of the feet are rounded and hard. The toes are
tightly closed, and slightly arched. The nails are always black. The rear
feet may turn out slightly to allow for double dewclaws in action, as long
as the hock joint remains vertically straight. Foot faults: long, flat or
splayed. Toeing in or out in front. Pads without elasticity or that are flat
or soft. Any nail colour other than black is disqualified.
Double Dewclaws: Double dewclaws on both back feet. Each double
dewclaw must be made up of two bony parts, one in each toe with a nail,
commonly found existence of more than one nail per toe is
permitted). They should be placed as near to the ground as possible,
assuring a better setting of the foot. Dewclaws may be side by side,
without separation as long as each toe in each dewclaw has a bony part.
It is permissible to have a missing nail. As long as there are two proper
dewclaws, missing nails should not be penalized. There is no penalty for
more than two toes in a set of dewclaws. Double dewclaws occasionally
appear on the front legs as well. There is no penalty for this. Faults:
placed too high (mid-way to the hock). Disqualifications: Single
dewclaws; Empty dewclaws; No dewclaws. Lack of two bones, one in
each double dewclaw, even if nails are present. Tail:
Whole, well furnished with hair, forming a hook (crochet) at the tip. The
tip of the tail should meet the point of the hock, not exceeding more
than 5 cm beyond. In repose, the tail hangs straight down until it reaches
the crook, viewed as the letter “J“ from the right side of the dog. The
crook does not deviate side to side, but remains in line with the tail. In
action, the tail is not to be carried over the level of the topline. Gait: A well-built Briard is the image of a powerful dog with a light and supple movement, appearing to glide, moving as if he doesn’t even touch the ground. This movement is known as “quicksilver”. The dog is able to execute sudden turns and stops as a good herding dog must do to accomplish his work. He possesses good reach and drive with legs converging towards a single track as speed increases. The front and rear feet meet, but do not overlap steps at a trotting gait. |
|||